1. Open the hood and remove the cap nuts and the wiper arms. Be careful not to damage the hood when removing the wiper arms.
2. Remove the hood seal and air scoop by prying the
trim clips off and removing the screws.
3. Disconnect the connector from the wiper motor
assembly, then remove the three mounting bolts and
the wiper linkage assembly.
4. To remove the wiper motor assembly, remove the
three mounting bolts and one nut from the wiper linkage
assembly.
5. Install the wiper motor assembly in the reverse
order of removal.|||i believe the wiper motor is under the cowl, under where the wipers are mounted. you have to disassemble the panel, remove the wiper arms etc to access it|||There is a clip in the middle of it that releases the old... The new ones go in via reverse process. You can also check your owner%26#039;s manual or have any NAPA / Auto Zone do it for you (they do it for free with purchase).|||Get a Chilton or Haynes manual from the auto parts store... Although if you have to ask here for instructions, it might be better to let someone who knows what they%26#039;re doing change it...
